No registration cam 2 cam
Move the camera to a place near the camera and check the Wi-Fi signal strength of the router in the network menu of the camera settings.3.If the distance between the camera and the router is too far, an alternative method would be to install a Wi-Fi Extender in a spot where the signal is weak.When booting is completed, the red light starts to flicker.2.As the reset button position or the button press and hold time may vary depending on the model, please read the user manual carefully.3.
As there is no function to retrieve your camera password, you will need to create a new password.2.However, if the Wi-Fi extender is located on a different floor from the floor where the router is located, the performance may be ineffective. Blue light flickering: camera is searching for available Wi-Fi routers4.In this case, install a LAN cable in the router to connect the cable to the Wi-Fi extender.1. Blue light ON: camera is connected to a configured Wi-Fi router5.IP cameras use the RTSP real-time video streaming protocol for streaming the video.This protocol uses port 554, so a port forward/virtual server for this port has to be set up on the router.